Absence Seizure EEG Brainwave Sensor Cap With Ag / AgCl Sintered Electrodes And Common Connector
Description:
Spontaneous activity is measured on the scalp or on the brain and is called the electroencephalogram. The amplitude of the EEG is about 100 μs when measured on the scalp, and about 1-2 mV when measured on the surface of the brain. The bandwidth of this signal is from under 1 Hz to about 50 Hz.see follow figure.
Features:
Available with up to 128 channels
Short preparation time thanks to special electrode holders
Small sintered Ag/AgCl electrodes ensure high signal quality
Optimized electrode form minimizes induction artifacts
Long service life thanks to high quality materials
No exposed or tangled cables
Stable electrode positions from recessed rubber rings
Comfortable material ensures a stable and pressure-free fit
Easy handling due to color coding and marking
Optional fastening above and below the chin with two straps
Advantages:
Conductive surface of Ag/AgCl sintered electrode is increased in 6 times. It allows to achieve: -stable electrical contact; -low impedance 0.0 kOhm.
Easy of adding a conductive gel due to a 25% increase hole in the electrode.
Excellent fit of the electrodes to head and durability of the cap due to the high isotropic elasticity of new textile material.
The additional protection of wires allows using EEG cap during long-term monitoring without elastic net bandage.
Better comfort for patient due to a new miniature ear adapter.
The indelible printing marks applied to each electrode allow to change a textile base of the cap by dint of detaching of the electrode system and install it on the new cap the same size.
Specification:
cleaning:
Immediately after removing electrodes, wipe off excess paste and clean by rinsing or briefly soaking in distilled or deionized water.
Product Tags:
|
|
Easy Handling EEG Helmet Brainwave Sensor Cap With Ag / AgCl Sintered Electrodes Images
|
